Alfa Romeo 4C Forums banner

Recent content by jamiealfa

  1. Going to rolling road tomorrow

    Engine and Technical
    I do know how to get more power as well........... :cool:
  2. Going to rolling road tomorrow

    Engine and Technical
    Well after two weeks work this is where we are with the 2.0 litre engine, 404 bhp not to shabby, I was expecting slightly more at around 425 bhp and with some other changes that is easily possible. We came across a number of issues on the way but we have worked them out, some of which I suspect...
  3. Anyone selling his turbo ?

    Engine and Technical
    Buy one from us and pay the surcharge, you will get the money back when you return the old core provided it is OK
  4. New for Christmas

    Engine and Technical
    We are releasing our switchable exhaust for Christmas and it is an absolute bargain at just over £1000, more details to follow.......
  5. Issue with Alfaworks Clone ECU

    Engine and Technical
    Would it be possible to plug our ECU is and film it with the car going in a straight line without anything else going on please.
  6. Issue with Alfaworks Clone ECU

    Engine and Technical
    I suspect you have got a higher rev limit on the engine ECU than the gearbox ECU will allow so we either need to take down the rev limit on the engine ECU or lift the rev limit on the gearbox ECU.
  7. Going to rolling road tomorrow

    Engine and Technical
    Hold your horses we have booked the rollers until next Friday so there is much work to do.
  8. Going to rolling road tomorrow

    Engine and Technical
    This another 2.0 litre but with some new trick bits on it, so we are expecting power into the low 400's. We suspect that we are going to have to uprate the fuel pump and change the injectors to get to where we want to be though.
  9. Issue with Alfaworks Clone ECU

    Engine and Technical
    BTW it is not helping that I cant view your video!
  10. Issue with Alfaworks Clone ECU

    Engine and Technical
    Please remember when expecting a reply we are on a very different time zone to you and we do need to work out what is happening with your car as this is not a problem we have had before
  11. Going to rolling road tomorrow

    Engine and Technical
    We are off to the rolling road tomorrow with our latest exhaust and engine modifications, wish me luck.....
  12. Look what I have got for the suspension

    Tires, Wheels, and Suspension
    I have had the outer ball joint made for the front and rear wishbones so you no longer have to buy the whole wishbone when it fails, the little ball joint does the front upper wishbone while the larger joint does the lower front wishbone and the rear wishbone.
  13. Alfaworks gearbox oil cooler (any hints on install?)

    Engine and Technical
    Here are the instructions https://www.alfaworkshop.co.uk/4C_gearbox_oil_cooler_fitment.shtml
  14. NITRON R1 vs NOVITEC corse+ black série or novitec competition

    Tires, Wheels, and Suspension
    There are 2 basic shocks single way adjustable, which adjusts bump and rebound together and 3 way adjustable which has individual adjustments for bump and rebound and has high speed bump adjustment as well. Then you can get both types in road and race versions which have different spring rater...
  15. NITRON R1 vs NOVITEC corse+ black série or novitec competition

    Tires, Wheels, and Suspension
    I have tried most of the offerings from all the manufacturers and Nitrons are the best I have tried so far, please bear in mind that you can get 4 versions of the Nitrons. 1. Single way road setup 2. Single way race set up (this is the one I like as it represents good value for money and...
Top