Alfa Romeo 4C Forums banner

Search results

1-20 of 31 Results
  1. 7K 2015 Alfa 4C LE Sold for $45,250 + Fees on BAT

    Alfa Romeo 4C General Discussion
    I think BAT results tend to be on the high side, right now GTV's are hot and 240z's.
  2. FS: Yellow shield decal

    Classified Area
    I'd like one pair, how do I purchase?
  3. FS: Yellow shield decal

    Classified Area
    I've had no luck getting a reply to my pms.
  4. How to reduce understeer

    Tires, Wheels, and Suspension
    I plan to mill down the stock upper blocks to about 2mm thinner than the Jamie blocks That should add about 1 degree of negative camber to the 1.5 I have now. There appears to be enough clearance between the control arm bushing housing and the chassis so that they will not rub. Probably won't...
  5. FS: New Gale Motorsports rear Uniball bearing

    Classified Area
    Still for sale?
  6. Gt4

    Alfa Romeo 4C General Discussion
    I have a 2015 GTS (pdk) and 2017 4c coupe with Akropovic. Cars are both great, guite different. I recommend you drive both. GT4's only come manual, next version should have pdk option but release date is not set and will probably sell above list. When new GT4 pdk's come out, manuals will...
  7. Wtb left rear fender liner/inner fender!!

    Classified Area
    They're only about $500 from alfa!
  8. EC Phase 2 & Novitec downpipe

    Classified Area
    What are you asking for the items separately and together?
  9. bolt tightening every 12 & 24--am I getting ripped off?

    Alfa Romeo 4C General Discussion
    Can anyone get a copy of the list of bolts to be checked? I don't think it can be a dealer only service in US as long as work is documented and follows factory procedure.
  10. 305s on the rear

    Tires, Wheels, and Suspension
    I can't believe you're not getting understeer with that much rubber out back and only 225's on front.
  11. 4C launch edition on BAT.....

    Classified Area
    If you're talking about the vin sticker on the sill next to the trunk release, not the one above it, removal of that sticker results in a series of void letters appearing in the sticker. Unless you think the car is not the one indicated by the vin, it sounds like a case of sour grapes. Sales of...
  12. 4C in Colorado

    New Member Introductions
    The msrp for the oem sill is around $6K!
  13. 4C in Colorado

    New Member Introductions
    The zender skirts are like those on the show car from a couple of years ago. They are carbon fiber, fabricated in Germany and sourced by Matt at Alfa9supply thru an italian distributor. I used dryer duct adapters from home depot that are 4" circular on one side and 4" oval on the other, with a...
  14. 4C in Colorado

    New Member Introductions
    Thanks for posting the photos. I'm not too tech savvy but when I drag the jpg file to drop it just vanishes. File size is only 2MB. The right intake is ducted under the airfilter housing into the ac compressor area. I figured that would provide more air to the right side of the engine. I have a...
  15. 4C in Colorado

    New Member Introductions
    My 4C project is finally finished. Car needed right sill so I sourced Zender carbon fiber sills thru Matt at Alfa9Supply. Long process but got it put back together before snow flies. Have added Alfaworks blocks but otherwise stock. Added some faux carbon vinyl wrap, not getting carried away...
  16. Carbon Fiber door triangle

    Appearance & Body
    The screw is accessed from the inside. The rubber triangular surround on inside has a positioning button on the inside of the rubber surround. Once you peel back the rubber surround and pop out the button, you can access the screw through the hole that the button goes into. There's a clip on the...
  17. Selling my 2015 4C Launch Edition #302

    Classified Area
    Can't seem to get a reply on the fender badge question I guess its a secret society thing.
  18. Potentially serious damage to my car

    Alfa Romeo 4C General Discussion
    If you remove the fender liner you'll see the attachment bolts for the fender to the tub and sill panel. You can probably shim out the bolt to the tub to move the fender forward slightly. The attachment to the sill panel has some adjustability without shimming.
  19. Flea Market

    Classified Area
    How much for shims and blocks in US dollars. Do you take paypal? Thanks
  20. 4C Left Sill Panel for sale

    Classified Area
    4C left sill panel for sale. Came off 2017 4C with 1,000 miles. Competition red with oem paint protection film. Slots cut into panel in sill area to separate panel from chassis repaired and primed. Includes carbon fiber inlet. Asking $2,900. Currently listed on Ebay under car parts with photos...
1-20 of 31 Results
Top