Carbon Fiber Hardtop double dome finally here!
321 - 340 of 369 Posts
Joined
·
1,596 Posts
Just woooooooow!Great quality!!!! Very happy I purchased this even before having the car!!![]()
![]()
Sent from my ASUS_I005DC using Tapatalk
(i've got a soft spot for black spiders) That's such an angry looking spider
.Thank you for sharing images with your dangerous black Spider!Great quality!!!! Very happy I purchased this even before having the car!!![]()
![]()
Sent from my ASUS_I005DC using Tapatalk
Joined
·
2 Posts
I would like to buy one hard tip for my 4c please. I live in California. What info do you need from me
Joined
·
2 Posts
Joined
·
8 Posts
team, i would like to purchase one, please post info....thank you....
Joined
·
3,886 Posts
You can buy it on his website here:
4C Spider Carbon Fiber Hard Top • BeyondShapes
4C SPIDER carbon fiber hardtop. double dome coupe look alike unique special.
beyondshapes.de
I think you can also PM him (@epoxid ) Constantin is a great guy. I am hoping to get one of these myself relatively soon.
Joined
·
8 Posts
You can buy it on his website here:
4C Spider Carbon Fiber Hard Top • BeyondShapes
4C SPIDER carbon fiber hardtop. double dome coupe look alike unique special.
I think you can also PM him (@epoxid ) Constantin is a great guy. I am hoping to get one of these myself relatively soon.
Thank you for such a quick response thank you againYou can buy it on his website here:
4C Spider Carbon Fiber Hard Top • BeyondShapes
4C SPIDER carbon fiber hardtop. double dome coupe look alike unique special.
I think you can also PM him (@epoxid ) Constantin is a great guy. I am hoping to get one of these myself relatively soon.
Joined
·
59 Posts
See my post here: link to other thread
Joined
·
852 Posts
Your cf halo is interesting. I like how you did it.
Joined
·
1,053 Posts
Joined
·
2 Posts
Is this top still available?
Joined
·
59 Posts
Check out his website:4C Spider Carbon Fiber Hard Top • BeyondShapes
Joined
·
637 Posts
@ALPHAmole
I absolutely love mine... It took a while to get it to fit correctly because my car has an unusually large gap between the windshield and the rear latches. I actually had to make a slight modification to the leading edge so it would seal correctly, but @epoxid was super helpful explaining how the top was intended to fit.
Major highlights:
Once you get it to seal properly it is tight enough that the airflow out the fan vents is reduced if the windows are rolled up all of the way. Obviously, the soft top allowed pressure to escape.
My advice? If you are tech savvy you won't have any trouble figuring out how to get it to fit correctly and you will be super happy. If you are not that tech savvy, find someone who has figured it out or a shop. It isn't hard but you can waste hours mucking around with it. There are lots of simple things you need to do to make it perfect. For example:
* Use a pen or large screwdriver to line up the shims on the rear mounting points so the hole is round and lined up properly. Otherwise you will be jamming the latch every time you try to open and close it.
* If the front edge doesn't line up evenly on both side move the shims in the rear to balance out the alignment.
* Make sure the removable gaskets where the window slides into is lined up correctly where they fit into the windshield gasket. Otherwise you will have wind noise and water leaks.
The list goes on...
Feel free to PM me if you have any questions or issues..
I absolutely love mine... It took a while to get it to fit correctly because my car has an unusually large gap between the windshield and the rear latches. I actually had to make a slight modification to the leading edge so it would seal correctly, but @epoxid was super helpful explaining how the top was intended to fit.
Major highlights:
- It is quiet at high speeds and reduces street noise in town...
- Cooler in the summer and I assume warmer in the winter
- 100% waterproof, zero leaks.
- Actually faster and easier to install and remove than the soft top
- Looks great. It actually reminds me of the Dino targa in appearance..
Once you get it to seal properly it is tight enough that the airflow out the fan vents is reduced if the windows are rolled up all of the way. Obviously, the soft top allowed pressure to escape.
My advice? If you are tech savvy you won't have any trouble figuring out how to get it to fit correctly and you will be super happy. If you are not that tech savvy, find someone who has figured it out or a shop. It isn't hard but you can waste hours mucking around with it. There are lots of simple things you need to do to make it perfect. For example:
* Use a pen or large screwdriver to line up the shims on the rear mounting points so the hole is round and lined up properly. Otherwise you will be jamming the latch every time you try to open and close it.
* If the front edge doesn't line up evenly on both side move the shims in the rear to balance out the alignment.
* Make sure the removable gaskets where the window slides into is lined up correctly where they fit into the windshield gasket. Otherwise you will have wind noise and water leaks.
The list goes on...
Feel free to PM me if you have any questions or issues..
321 - 340 of 369 Posts
