Considering replacing OEM stock plastic instrument bezel with a carbon fiber unit. I would like opinions on which is best way to go, the matte or gloss finish. I have read that the gloss may cause possible sun glare problems.
I agree with Philster.....my LE car has the matte factory CF. Even it has a bit of a reflection on the window. The gloss would be horrible for reflection.
I have a matte carbon binnacle that already reflects in the windscreen in some light conditions. A gloss one would be even more annoyingly distracting.
Okay, so I really have tried to review posts about this but have been unable to find any direct information.
I'm 6'1" and have a 36" waist and find that the stock seats hit me right in my hip bone. Pretty uncomfortable.
So I'm trying to find seats that will sit lower and are slightly wider that...
Today I raised the passenger seat up. It was easy for me to do. The only tool I needed was a T40 Torx. Torx was developed for robot assembly many years ago. Yes I spelled Torx correctly. It looks like an eight pointed star drive. I used a 3/8 breaker bar and Torx socket.
I removed the two...
I am going to be installing a combination of Kansas rails, harness bar, recaro spgs, and schroth harnesses this week and had a few questions for those that have embarked on this prior....
1. Anyone have pictures of how their harness lap belts are mounted?
2. For mounting the seat; is removing...
Hey all,
Like many of you, one of the few gripes I have with our car is the rear visibility. When my Porsche was wrecked, the insurance company (inexplicably) gave me a Cadillac Escalade EXT as a rental. I’ll digress on the hilarious difficulty I had operating that vehicle after five years of...
Hi, a friend of mine seems to have done it.. these are the pictures of the driver side seat, changed to a Sparco CF one, weight at worse same than the original seat, more support, and 6 point harnesses.. it looks like the cf tub already has the fitting for the 6 points, covered by a plastic tap.