Alfa Romeo 4C Forums banner
1 - 13 of 13 Posts

·
Registered
Joined
·
957 Posts
Discussion Starter · #1 ·
Takeoff 2016 US spider with around 45k miles, has Koshi Carbon Fiber Inserts dot-bonded (fiberglass adhesive appplied in a dime-sized "polka-dot" pattern to allow easier removal, but firm attachment), and does not include the badge nor center "spada" grille, but everything else, including oem side repeater lenses.

Tracked so pits and scratches all over, but zero damage, no lip install/holes drilled. All tabs and mounting points perfect. Will need repainting, price of $500 reflect that, really looking to recoup my cost for the Koshi as they are beautiful... Crazy the factory didn't offer it, such an easy profit and such a more cohesive improvement!

Located in Central Florida at the moment, can ship in a lot of bubble wrap exactly as my Genoa bumper came shipped (perfectly, no scratches or bends or breaks)... anything more you arrange and pay for it, hoping someone wants a quick fix/parts item or a track spare to keep their OEM perfect.

Land vehicle Grille Automotive lighting Hood Vehicle
Hood Automotive lighting Motor vehicle Automotive design Fender
Hood Automotive lighting Automotive design Bumper Vehicle door
Automotive lighting Car Hood Automotive design Motor vehicle
Automotive parking light Automotive lighting Hood Vehicle Motor vehicle
Car Vehicle Automotive tire Hood Automotive lighting

Car Hood Toy Automotive lighting Motor vehicle
Hood Motor vehicle Vehicle Automotive design Bumper
Hood Automotive lighting Motor vehicle Automotive design Bumper
 

Attachments

·
Registered
Joined
·
957 Posts
Discussion Starter · #3 · (Edited)
Just FYI
@Max Tayant is 1st for this (the second I posted... If it weren't for your wheel mod, I'd honestly think you're a very expensive AI bot!), @diegolrz is 2nd

I also have other take offs (didn't think there would be much interest!):
1. Deleted - keeping engine cover simce I found my old s2000 and viper oem manifolds and will make a sort of wall art from them.
2. Oem plastic Seat belt covers/shrouds (all unbolted properly for koshi items, no issues) $50
3. Oem steering wheel (damaged sides for removal, otherwise 20k miles used no track use, all electronics untouched - used max tyant's full kit for new hub) $100
4. Oem center console rear section (keeping front/buttons part for mockup of a custom skeletal carbon piece when the manual drivetrain swap is done) $100
5. Oem 20k miles rotors, pads, brake lines no track use $50
6. Oem front turn signal assemblies (orange pieces by the front wheels) $20
7. OEM rear fenders/wings in the red metallic, 50k miles. On car atm but if I have a buyer with a good price then I'll order the carbon Scara ones.
8. Dash subframe bracket that bolts under the passenger airbag $50
9. Carbonlook 2-4-1 cupholder conversion that works wonders but I went with bolt-on seat-bolt item that works on motorcycles and aircooled 911's $5
10. OEM wheel bolts 20k mile takeoff, all of them no issues (I swapped to studs)

Vehicle Automotive tire Automotive lighting Motor vehicle Steering part

Plastic bag Gas Plastic wrap Waste container Plastic

Automotive design Audio equipment Electrical wiring Gas Fender

Tire Automotive tire Light Automotive design Tread

Automotive tire Motor vehicle Automotive lighting Bumper Cookware and bakeware
 

·
Registered
Joined
·
957 Posts
Discussion Starter · #10 ·
Ok updates:
Wheel is no longer an option for anyone that needs shipping, as no one is letting me ship an airbag (didn't know about this) - usps got mad, fedex/dhl linked me to a very clear "we cannot ship these items" with an airbag pic larger than a gun and some leaky needles so I guess it's a very frowned upon thing to even ask(?).
 

·
Registered
Coupe sold. Kept wheels for Spider
Joined
·
467 Posts
Ok updates:
Wheel is no longer an option for anyone that needs shipping, as no one is letting me ship an airbag (didn't know about this) - usps got mad, fedex/dhl linked me to a very clear "we cannot ship these items" with an airbag pic larger than a gun and some leaky needles so I guess it's a very frowned upon thing to even ask(?).
I used to make a pretty good living selling airbag 'sets' and shipping them USPS... about 10+ years ago. Things have really changed in regards to Hazmat and necessary certifications/procedures that I was forced to find other products. Theoretically a static charge could set one off so I don't think I'd want to be on a plane that had them in baggage, although Lithium batteries have been documented as causing plane crashes
 

·
Registered
Joined
·
957 Posts
Discussion Starter · #13 ·
UPDATE I am out of state (central Florida) until mid-December so I will repost the unsold items then if still selling them - the steering wheel will have a new price, be sold entirely with airbag, and buyer will need to arrange their own pickup given all I've learned about these odd "gems". Given these steering wheels sort of self destruct all the clips and internals when deployed, it really will be a special, rare OEM item.
 
1 - 13 of 13 Posts
Top