Template for 4C and Italian flags on side panel

1354 Views 1 Reply 2 Participants Last post by 4Canada, May 30, 2022

AidanTC

Discussion Starter · May 30, 2022

Hi All
Following a request to share measurements and details on the template to assist placement of Italian flags on the 4C please find the specifics below.

Recommend use of a hard card to form the template. All measurements are in mm.

The base of the card lines up with the top of the side skirt lime and the angle to the door line.

Instructions also shown.

Best

Aidan

Rectangle Handwriting Font Parallel Office supplies

See less See more

Save

Reactions: 5

1 - 2 of 2 Posts

4Canada

· #2 · May 30, 2022

There's already a thread on that but this is easier to find here (instead of 6 pages) - so I added a link to this in the DIY and Technical Reference index thread. (*)

Thanks for doing this!

* NOTE for anyone not familiar - in the Engine & Technical section of this forum, you will find a sticky thread "DIY and Techincal Reference Index". It has links to many DIY projects and information that you might be looking for.

Save

Reactions: 3

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month