Alfa Romeo 4C Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
203 Posts
There are two bolts on each side of that piece. Mine was sagging a bit and I just loosened the bolts on one side and pushed the part towards the center of the car and re-tightened the bolts, then did the same to the other side. Pretty much fixed it, but my sag wasn't as big as yours. But worth a shot.
 

·
Registered
Joined
·
203 Posts
I think the main issue with that part is that it's just pretty cheap plastic with no support in the middle. My car had the slight sag with delivery miles so I don't think that was turbo related. Also, since I fixed it over a year ago, it has not started to sag again (and I'm in hot Florida). Some folks have taken that part off completely - I have no idea if this is a good idea or not, as I'm not sure if that piece blocks water infiltration or if it's merely cosmetic.
 
1 - 3 of 3 Posts
Top